Manual Erase Function - Panasonic WJ-HD500A Operating Instructions Manual

Manual Erase Function

1. Repeat the procedures until the ERASE menu is dis-
played on the monitor screen for auto erase.
9-3-2 ERASE
AUTO ERASE OFF
ERASE DATA BEFORE SEP12.00
ARE YOU SURE TO EXECUTE?
[SET]:EXECUTE
2. Move the cursor to the ERASE DATA BEFORE parame-
ter in the menu by pressing the D or C button.
3. Select the month by pressing the + or - button, then
press the B button to select the date and year by
repeating the procedure.
4. Move the cursor to the EXECUTE parameter by press-
ing the D or C button.
Select "YES" by pressing the A or B button, then press
the SET button to execute erase.
9-3-2 ERASE
AUTO ERASE OFF
ERASE DATA BEFORE SEP12.00
ARE YOU SURE TO EXECUTE?
[ESC]:STOP
The recorded data before the specified date will be
erased from the disk.
100
YES NO
YES NO
NOW ERASING
5. When the erase is completed, "DONE!" appears on the
lower-center in the menu.
9-3-2 ERASE
AUTO ERASE OFF
ERASE DATA BEFORE SEP12.00
ARE YOU SURE TO EXECUTE?
[ESC]:STOP
DONE!
6. Press the SETUP/ESC button for two seconds or more
to close the menu and return to the normal screen.
YES NO