Panasonic WJ-HD220 Operating Instructions Manual page 26

Set 00:00 for the start time of the initial event of the
next day.
• A combination camera will move to the preset posi-
tion if an alarm arises and the position has been
assigned beforehand in TRIGGER ACTION SETUP
of the REC SETUP menu.
4. Press the JogDial while the cursor is on SETO to open
the event programming menu.
G Recording Mode Setup (PROG1-4
SETUP, NO. 1-4)
PROG1 NO.1 SETUP
REC MODE
REC RATE
REC QUALITY
ALM REC MODE
REC RATE
REC QUALITY
PRE ALM REC
POST ALM REC
DYNAMIC REC
TRIGGER ACTION SETUPO
CAM REC SETUPO
Parameters for internal timer recording are assigned to
each event (NO. 1-4) of the program (PROG 1-4) in this
menu. There are five recording modes available: super fine
(SF), fine (FQ), normal (NQ), long-time (EX) and optional
(SP). If combined with audio recording (-A), the number of
recording modes doubles. The remaining recording time
(shown as xx in the list below) is determined by the select-
ed recording mode (10 options) and resolution (2 options)
in the SYSTEM SETUP menu.
In the SP mode, the field rate and picture quality are vari-
able and can be selected at option in the range of 0.1 to 30
FPS with five quality level options respectively. After the
recording mode is selected, the available recording time is
determined and displayed.
Rec Mode Quality
SF-xxxH Super Fine
FQ-xxxH Fine
NQ-xxxH Normal
EX-xxxH Long time
SF-AxxxH Super Fine
FQ-AxxxH Fine
NQ-AxxxH Normal
EX-AxxxH Long time
SP-AxxxH Optional setup
SP-xxxH Optional setup
Notes:
• By selecting a recording time, the recording rate (REC
RATE) and the recording quality (REC QUALITY) will be
automatically calculated and displayed. For details,
refer to the provided booklet "REC MODE TABLES for
WJ-HD220".
26
SF-24H
30FPS
SUPER FINE
SF-24H
30FPS
SUPER FINE
0S
10S
OFF
Audio Record Note
N/A
N/A
N/A
N/A
Available
Available
Available
Available
Field rate, quality
Available
selected optionally
Field rate, quality
N/A
selected optionally
• Even if preset to 30 or 15 FPS, the actual recording rate
may drop to 7.5 FPS at worst while busy multi tasks
such as playback, remote-access playback, remote-
access live image, FTP access, multi-split display, or
video motion detection are carried out simultaneously.
The status display will indicate "*PLAY" while playing
back the images recorded with a rate different from the
preset.
• Suffix "xxx" following "SP-" is specified in REC MODE
TABLE in the ADDENDUM attached to the manual.
1. Move the cursor to MODE, and press the JogDial. The
mode area will be highlighted.
2. Select a recording mode using the JogDial, and press
the Jogdial. Audio data will be recorded when a mode
with hyphen A is selected.
Available recording mode: SF, FQ, NQ, EX, SP, SF-A,
FQ-A, NQ-A, EX-A, and SP-A
3. When SP or SP-A is selected, specify a recording rate
(REC RATE) using the JogDial, and press the JogDial.
Available recording rates: From 0.1 to 30 FPS
4. When SP or SP-A is selected, specify a recording quali-
ty (REC QUALITY) using the JogDial, and press the
JogDial.
Available recording qualities: SUPER FINE, FINE,
NORMAL, EXTENDED
G Alarm Recording Mode Setup (ALM
REC MODE)
Alarm events arising within the time zone specified by the
program will start recording with the preset parameters.
Refer to "PROG NO. SETUP" described above in this menu
for operating procedures and available parameters, since
they are very similar.
G Pre-alarm Recording (PRE ALM REC)
Picture recording will start prior to the alarm activation at
the time specified by this setting.
1. Move the cursor to PRE ALARM REC with the [D] or
[C] button.
2. Select the desired pre-recording time with the JogDial,
and press the JogDial.
The default is 0S.
Available times (seconds): 0S, 1S, 2S, 3S, 4S, and 5S