Error Messages Displayed On The Computer - Panasonic WORKIO DP-1810 Operating Instructions Manual

Error messages displayed on the computer

Problem
Error in writing to LPT1.
Unable to write to the Specified
device.
Error in writing to LPT1.
Printer timeout error occurred.
Printing is disabled due to an error in
the current printer settings.
Network Print DLL Error.
Network Port is Busy.
Cannot print because an error is
found in the current printer setting.
Verify that the device is connected to the computer correctly.
Verify that the power of the device is turned on.
Verify that the paper is properly loaded.
Verify that the power of the device is turned on.
Excessive data volume or number of pages may overflow the device's memory,
disabling data reception.
Increase the timeout setting value in properties (for transmission retry).
• Reference :
Windows 98/Me [Details Tab]
Windows NT 4.0 [Ports Tab]
Windows 2000/XP [Ports Tab]
Differences in settings such as paper size or printing orientation exists between the
application and the printer driver.
Specify the correct settings.
• Check if the device is turned "On" and the 10/100 Base-TX cable is properly
connected.
• Printer Properties may be incorrectly configured. (i.e. Printer Port)
• The device may be processing someone's print job, please wait and try again
later.
• The device is either Transmitting or Receiving an email.
• Verify and specify the paper size or orientation to coincide with the application
and the printer driver settings.
Troubleshooting
Action
(See page 22)
(See page 35)
(See page 52)
71