Troubleshooting; Printing Operation Fails - Panasonic WORKIO DP-1810 Operating Instructions Manual

Troubleshooting

Troubleshooting

Printing operation fails

If the Panasonic Printing System is not printing or working as expected, and if you are not sure what to do,
start your troubleshooting by checking the basics below:
• The connection cable (Parallel Printer Cable or Ethernet LAN Cable) is properly connected.
• The length of the parallel printer cable is not longer than 20 ft. (6 m).
• Power of the device is turned ON.
• Paper is loaded properly on the device.
• Error message is not displayed on the device.
The above points can be verified by printing a test page. Refer to the following for procedures for test page
printing:
Windows 98/Me [General Tab]
Windows NT 4.0 [General Tab]
Windows 2000/XP [General Tab]
(See page 21)
(See page 34)
(See page 50)
69