Connection Error Messages - Panasonic PT PT-LB90NT Network Operation Manual

Connecting with wireless LAN

Connection error messages

If wireless LAN is not available, [
<Projector Search> window ([S-MAP] or [1-4/U]).
Click the [ ] button at this time to display information on resolving the
issue as shown below.
Click the [Detail] button to display detailed information.
Note that the [Detail] button is available only when the Firewall/
Connection Utility is found active.
To perform the selected Firewall/Connection Utility process every
time, check [The operation is always performed from next time.]. This
message will no longer be displayed from the next time the software
is launched. If you want to display the message when the software is
launched, check the corresponding item of <Firewall/Wireless LAN
Utility Message> on the [Other2] tab of [Option]. (See page 50)
The displayed information is as follows.
Detected issue
A firewall or [****]
network bridge is
When destination cannot be
detected
identified, deactivate [****] which is
the cause.
※ "Windows Firewall", "Network Bridge" and other security software found will appear in [****].
] will blink in lower left corner of the
Displayed information
is installed.
※
(cont.)
Current setting [Single] - [1-4/U]
Setting
Select access port
Remarks
• Has your firewall in Windows XP been disabled?
• Is Wireless Manager mobile edition 5.5 registered
in [Exceptions] ([Control Panel] → [Security Center]
→ [Windows firewall]) with the Windows XP SP 2?
• Is this software registered in the [Exceptions] tab
in [Control Panel] – [Windows Firewall] – [Allow
program through Windows firewall] in Windows
Vista?
• Are any firewall-containing applications installed?
• If you do not expect ever to use Network Bridge
and see no need for it, delete it from your system.
22
PCSearch Update
All
Connectability Connect Close
Reference page
P.73 - P.76