Error Messages - Panasonic WJ-ND300 Administrator Console Operating Instructions Manual

Error Messages

At startup
Message
Cannot load language data.(Label.txt is dam-
aged.) Will show in English text.
Starting failure. The registry value may be
changed. Please reinstall.
When downloading/uploading
Message
Communication error.
Memory error.
File error.
Incorrect password.
Upgrade the setup menu of the WJ-ND300 to
version 2.0 or later.
Since WJ-ND300 series differs from the version
of a setup under edit, it cannot upload.
When opening a file
Message
Cannot open setup file.
Cannot open setup file.
(Incorrect type (NTSC/PAL).)
24
The initial display setup file is broken. The broken part of the
file will be displayed in English. Re-install this software to fix
this problem.
It may be possible that the registry values have been changed.
Re-install this software to fix this problem.
It may be possible that the entered address is incorrect, con-
nection to the network disk recorder has been disconnected, or
no reply from the network disk recorder. Check if the entered
address is correct or not. If the entered address is correct,
check the connection of the network disk recorder. If it is possi-
ble to monitor live images using a web browser, it may be pos-
sible that timeout has occurred because the processing perfor-
mance of the recorder has temporarily slipped. Check if alarm
signals are being supplied continuously or not, and retry
uploading.
Processing failed because of memory shortage. Close other
applications and retry. If it fails again, restart the PC.
Check whether the write protection is applied for the folder in
which this software is to be installed or not. Check also the
available disk space. If this error occurs continuously, restart
this software.
The entered Administrator Password of the network disk
recorder is incorrect. Enter the correct Administrator Password.
The setup file is about to be uploaded/downloaded to the WJ-
ND300 whose setup menu version is older than version 2.0.
Upgrade the setup menu of the WJ-ND300 to version 2.0 or
later.
The setup file whose version is 2.xx is about to be uploaded to
the WJ-ND300 whose setup menu version is 3.xx, or vice
versa.
It is impossible to open the file because the file is corrupted.
It is impossible to open a file of this type since the television
system (NTSC/PAL) is different.
Cause
Cause
Cause