Panasonic WORKIO DP-1810 Operating Instructions Manual page 44

Configuring the Printer Driver Settings
Windows NT 4.0 (User)
Handling Tab
1. Sorter
Select whether to Stack or Sort when printing multiple copies.
Note 1) When the Staple is set to On, the Rotate-Sort and Shift-Sort is not activated even if it is
2) Shift-Sort is not available on DP-1510P/1810P/1810F/2010E.
2. Printing on both sides (Duplex) (For DP-2000/2010E/2500/3000)
Select duplex printing for printing on both sides.
Note 1) Duplex Printing is allowed only when the Dual-Path Exit Guide Unit, Paper Transport Unit and
2) Check [Duplex Unit] check box in Device Options Tab.
3. Flipping Direction (For DP-2000/2010E/2500/3000)
Select binding side (Long Edge/Short Edge) for duplex printing.
4. Binding Margin (For DP-2000/2010E/2500/3000)
Select the binding margin upon duplex printing.
The width of the binding margin is specified on the main unit.
5. Output Tray (For DP-2000/2500/3000)
Specify the output destination. (Auto Selection, Inner Tray 1, Inner Tray 2)
Note 1) Output Tray selection is allowed only with Dual-Path Exit Guide Unit, Paper Transport Unit, Exit
2) Check [Inner Tray], [Finisher / Outer Tray] check boxes in Device Options Tab.
44
selected.
Automatic Duplex Unit (DA-FK200/FK210/MD200) are mounted.
Tray (Outer) or 1-Bin Finisher (DA-FK200/FK210/XT200/FS200) is installed.