Panasonic Panafax UF-585 User Manual page 141

Mode
Cannot utilize the remote
turn-on feature of the
telephone answering
machine (TAM). The fax
machine always answers
after the 8th ring.
Fax machine will not start
up when the telephone
answering machine is set
to give only an outgoing
message (OGM).
A beep...beep sound is
recorded on the
telephone answering
machine.
Fax machine starts up in
the middle of the outgoing
message even though the
caller wants to leave a
voice message.
Cannot record any
incoming message (ICM).
TAM Interface
The fax machine always
Trouble in
starts up at the end of the
Unattended TAM I/F
OGM and before the tape
Mode (OUT Mode)
advances to the end of
last ICM. (Your TAM only
uses a single cassette
tape to give OGM and
record ICM.)
Cannot receive from a
machine that does not
send CNG signal (a short
beep tone every 3
seconds) after dialing.
Cannot retrieve message
from the answering
machine remotely, the fax
machine always starts up
after the command code
is entered.
Cannot receive a fax
message, but can record
voice message.
Fax machine will not start
TAM Interface
to receive with the
Trouble In
telephone answering
Unattended Fax
machine in the
Mode (OUT Mode)
auto-answer mode.
Symptom
This feature is not compatible. The fax machine is designed to
answer after 8 rings if the TAM does not answer.
TAM that gives outgoing announcement only is not
compatible. The fax machine will work with a TAM that will
record Incoming message (ICM).
Speak a little slower between each word while recording an
outgoing message (OGM).
Make sure the outgoing message (OGM) does not have a
silent pause longer than 5 seconds.
Set Fax Parameter No. 20 (Silent Detection) to "Invalid".And,
instruct the calling party to press
phone during the OGM to start up your fax machine remotely.
Set Fax Parameter No. 20 (Silent Detection) to "Valid".Or,
Instruct the calling party to press
tone phone during the OGM to start up your fax machine
remotely.
Set Fax Parameter No. 20 (Silent Detection) to "Invalid".
Check your outgoing message, if it is too long, the calling fax
machine may have timed out. Try to shorten your outgoing
message to less than 15 seconds, or ask the calling party to
program your telephone number in their fax machine with 3
pauses and a "#" at the end. (ex. 5551212 PAUSE PAUSE
PAUSE #)
Increase the ring count for detection on the telephone
answering machine.
Troubleshooting
Cause / Action
twice on their touch-tone
twice on their touch-
page
--
--
--
8
--
38
38
38
--
--
139