Panasonic Panafax UF-585 User Manual page 15

Panasonic uf-585: user guide
Hide thumbs Also See for Panafax UF-585:
Table of Contents

Advertisement

Used to set Normal, Lighter, or Darker.
CONTRAST
(See page 43)
Also serves as an arrow key (<) to move the
cursor over recorded numbers and characters.
Used to set Standard, Fine or Super-Fine.
RESOLUTION
(See page 43)
Also serves as an arrow key (>) to move the
cursor over recorded numbers and characters.
Provides OFF, QUALITY or FAST settings for
HALFTONE
halftone documents. (See page 44)
Used to make copies.
COPY
(See page 70)
Used to start operations.
START
DIRECTORY
Used to search for a station name.
SEARCH
(See page 51 and 56)
OUT
Used to select either IN mode or OUT mode.
(See page 62)
(01-24)
One-Touch Keys
Used for One-Touch Dialing.
(See page 49 and 54)
(P1-P4)
Program Keys
Used to record long dialing procedures or
Group Dialing Number keys.
(See page 76 to 81)
Character Keys
The One-Touch Keys and Program Keys
also serve as character and symbol input
keys which are used to record your LOGO,
character ID and station name. The
character key template is printed on the
panel under the directory sheet cover.
Note : Whenever One-Touch keys are
changed to the character key mode
(to record your LOGO, station name,
etc...), use the UPPER/LOWER key
to switch between upper and lower
character set.
Control Panel
Used for the following:
VOL.
• Adjust the monitor and ringer volume.
(See page 25)
• Search the station name for Directory
Search Dialing.
• Confirm the entered station for multi-station
communication.
• Select functions.
• Confirm the current communication modes
(e.g. Page number, ID, Dialed Telephone
number, File number) when the unit is ON
LINE.
STOP
Used to cancel operations. When it is
pressed, the machine will return to standby.
Blinks when the machine is transmitting
ON LINE
a document or receiving.
Blinks when the remaining toner is
TONER
getting low and lights when the toner
has run out. (See page 16)
ALARM
Lights when trouble occurs.
(See page 137)
Used to insert a space while entering
SPACE
LOGO, character ID and station name.
Used to select either memory or direct
MEMORY
communication. (See page 46 to 56)
Used to turn the verification stamp ON or
STAMP
OFF. (See page 44)
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
P1
P2
P3
SPACE
P4 UPPER
MEMORY
STAMP
LOWER
13
1

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Panafax uf-595

Table of Contents