Installing The Cpu And Heatsink - TYAN B8026T70AV18E8HR Service Engineer's Manual

2.1.5

Installing the CPU and Heatsink

Follow the steps below to install the processor and heatsink.
1. Use a T20 Torx screwdriver to loosen the screws securing the force frame
in a sequential order (321).
NOTE: The force frame will automatically eject after the captive screws are
being released.
2. By placing your both index fingers on the sides on the metal handle, pull to
release the rail frame. Then lift the rail frame to its fully open position.
55
http://www.tyan.com