Subframe; Overview - Subframe; Engine Mount, Removing And Installing - Audi Q7 2007 Repair Manual

Audi Q7 2007 ➤
6-Cylinder Direct Injection 3.0L 4V TFSI Supercharged Engine - Edition 01.2016
5

Subframe

⇒ "5.1 Overview - Subframe", page 38
⇒ "5.2 Engine Mount, Removing and Installing", page 38
⇒ "5.3 Engine Support, Removing and Installing", page 41
5.1

Overview - Subframe

1 - Engine Support
❑ Removing and in‐
stalling. Refer to
"5.3 Engine Support,
Removing and In‐
stalling", page 41
2 - Bolt
❑ 120 Nm +180°
❑ Always replace
3 - Right Engine Mount
❑ Removing and in‐
stalling. Refer to
"5.2 Engine Mount, Re‐
moving and Installing",
page 38
4 - Bolt
❑ 50 Nm
5 - Bolt
❑ 40 Nm
6 - Nut
❑ 75 Nm
7 - Right Engine Support
❑ Illustration does not cor‐
respond to version in ve‐
hicle.
8 - Left Engine Support
9 - Bolt
❑ 50 Nm
10 - Nut
❑ 75 Nm
11 - Bolt
❑ 60 Nm
12 - Left Engine Mount
❑ Removing and installing. Refer to
13 - Bolt
❑ 120 Nm +180°
❑ Always replace
5.2

Engine Mount, Removing and Installing

Special tools and workshop equipment required
38
Rep. Gr.10 - Engine Assembly
⇒
⇒
⇒ "5.2 Engine Mount, Removing and Installing", page 38
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.