Table of Contents
Advertisement
CONNECTIONS
Connection B
Very Good Picture and Sound Quality
To use this connection you must have:
•
TV with separate RF and audio/video inputs (jacks)
•
VCR with RF and audio/video inputs
•
Coaxial and audio/video cables
To connect TV, VCR and antenna or cable box.
1. Connect coaxial cables as shown.
2. Connect audio/video cables as shown.
®
To receive DSS
1. Tune TV to receive line output from satellite receiver
(often called Input 1).
2. Tune satellite receiver to desired channel.
To receive off-air programming (no cable box):
1. Turn off VCR and satellite receiver.
2. Tune TV to desired channel.
To receive off-air programming (with cable box):
1. Turn off VCR and satellite receiver.
2. Tune TV to cable box output channel (usually CH2, CH3,
or CH4).
3. Tune cable box to desired channel.
®
To record DSS
1. Tune TV to record line output from satellite receiver (Input1).
2. Tune satellite receiver to desired channel.
3. Set your VCR to record on line input.
To view VCR programming:
1. Tune TV to VCR output channel (usually CH3 or CH4).
programming:
programming:
TV
IN
VIDEO
DSS
OUT TO TV
RECEIVER
VIDEO
IN FROM ANT
CH4
CH3
VIDEO
VCR
VIDEO IN
AUDIO IN
IN FROM ANT
CH3
CH4
OUT TO TV
VIDEO OUT
AUDIO OUT
CAUTION
Do not stack electronic components
or other objects on top of the DSS
Receiver. The slots on top of the
receiver must be left uncovered to
allow proper airflow to the unit.
Blocking the airflow to the unit could
impair performance or damage your
receiver and other components.
Do not stack the DSS receiver on top
of a "hot component" such as an audio
power amplifier.
R
L
AUDIO
SATELLITE
DISH
R
L
AUDIO
CABLE
SATELLITE IN
R
L
OR
AUDIO
OFF-AIR ANTENNA
R
L
33
Advertisement
Table of Contents
