Troubleshooting; Possible Faults - Kaba c-lever compact Installation Instructions Manual

Installation instructions
6.4

Troubleshooting

Under certain circumstances, the acoustic signals must first be activated using
the Programmer. Please see the Programmer user manual for information
regarding these settings.

6.4.1 Possible faults

Symptoms
Master medium cannot 1 x short
be programmed
Master medium not
recognised
User medium cannot be
programmed
Door cannot be opened 4 x short
with user medium
Repeated acoustic 1 x long
signal as system 1 x short
identifies user 1 x long
Repeated acoustic 2 x long
signal as system
identifies user
Repeated acoustic 1 x 3 s long
signal as system
identifies user, door
does not open
Door cannot be opened 1 x short
with programmed user
medium
External lever handle
always coupled
No acoustic signal as
system is initialised
Door does not open/
close at programmed
time
Door cannot be opened 8 x short
with programmed user
medium
Kaba c-lever compact
Acoustic Optical
Possible cause
signal signal
1 x red E-module already
programmed
No power supply
4000 media or groups
already programmed in
the e-module
Faulty medium
4 x short Medium not
red programmed
E-module time data is
missing
after 4 s Battery „low" (alarm)
1 x short
green
off Battery „flat" (alarm)
1 x green Coupling unit not
connected to e-module
Faulty coupling unit
TimePro function
activated
Faulty coupling unit
Electronics faulty
System time is lost
Incorrect programming
8 x short System test not
red completed correctly
k2evo703en-2014-01
Maintenance and troubleshooting
Measures
Initialise e-module
Provide power supply
Contact customer
service
Program medium
Check time profiles
Check the programming
Change batteries
Change batteries
Checking plug
connection
Replace coupling unit
Check the programming
Replace coupling unit or
check cable connection
Check electronics,
replace if necessary
Set clock
Replace coupling unit
Check and/or change
cable connections and
coupling unit
21