Operation; Operation Signals - Kaba c-lever compact Installation Instructions Manual

Operation

5 Operation
5.1

Operation signals

The acoustic signals may first have to be activated using the Programmer!
Action
Master A/B authorised
(open programming
window)
Add user medium
Delete user medium
Master A/B authorised
(close programming
window)
Authorised medium
Unauthorised medium
Master A/B unauthorised
Delete subgroup with
authorised master
Soft INI reset with A/B
structure with authorised
programming master A or
with B structure with
programming master B
16
Acoustic Optical
signal signal
1 x short 1 x green
1 x short 1 x green
2 x short 1 x green
1 x long 1 x green
1 x short 1 x green
4 x short 4 x red
1 x long 1 x red
2 x short 1 x green
2 x short after Green light on
10 secs, presentation
2 x short after of card, goes
a further 15 out upon
secs, successful
initialisation
k2evo703en-2014-01
Installation instructions
Confirmation
The acoustic signal sounds if
the medium is taken out of
range of the antenna.
Hold master medium in front
of antenna for approx. 10
seconds.
2 beeps after 10 seconds
confirms the complete reset
of the user media, 2 beeps
after a further 15 seconds
confirms the reset of all
master media.
Kaba c-lever compact