Panasonic WORKIO DP-CL21 Maintenance And Specifications page 39

Settings and Printing
Trouble
When connecting a printer
with USB interface and
installing the printer driver
with plug & play, the
printer is not added to the
Printers folder.
(Windows 98)
Maintenance and Spec.
Maintenance and Spec.
Possible Cause
Specifying the driver folder
is incorrect during installing
the printer driver with plug
& play.
Network
Corrective Action
Perform the following instructions to
install the printer driver again.
1. Be sure to turn the printer on.
2. Connect the printer to the computer
with a USB cable.
3. Click [Start], select Settings and
click Control Panel.
4. Double click the System icon.
5. Click the [Device Manager] tab.
6. Click DP-CL21P or DP-CL21M in
the Other devices.
7. Click [Remove].
8. Click [OK].
9. Click [Close].
10. Restart Windows.
11. Install the printer driver following the
Wizard window.
For the detailed instructions, refer to
"Installing the DP-CL21P
/DP-CL21M Software (For
Windows)" in the Setup Guide.
39
Troubleshooting