Panasonic KX-P8415 Maintenance Manual page 46

Settings and Printing
Error Message
Fuser Unit and Oil Roll*
Worn out
Fuser Unit wearing out
Imaging Unit
No tension
Imaging Unit
Not installed
Imaging Unit* 1
Wrong Type
Imaging Unit*
2
Worn out
Imaging Unit wearing out
Jam at A
See front door label
Jam at B
See front door label
Jam at C
See front door label
Jam at D
See front door label
Jam at E
See front door label
* This message is displayed when an improper option is used. You can still print a page by
1
pressing F/CONTINUE even when this message is displayed. However, it is not recommended
because we cannot guarantee the printing results.
You can still print a page by pressing F/CONTINUE even when "Worn out" message is
*
2
displayed. However, it is not recommended because we cannot guarantee the printing results.
Maintenance
Possible Cause
Fuser unit is worn out.
2
Fuser unit is wearing out.
Color imaging unit is not
installed correctly.
Color imaging unit is not
installed.
An incompatible color imaging
unit is installed.
Imaging unit is worn out.
Color imaging unit is wearing
out.
A jam has occurred in the
media feed area.
A jam has occurred in the
media feed area.
A jam has occurred in the
fuser unit.
A jam has occurred inside the
access door or the right side
door.
A jam has occurred in the
output area.
Specifications
Replace the fuser unit now.
Replace the fuser unit soon.
Install the color imaging unit
correctly.
Install the color imaging unit.
Replace the color imaging unit
with the one compatible with
this model (see the supplement
for supplies provided.
Replace the color imaging unit
now.
Replace the color imaging unit
soon.
Refer to
jam.
Refer to
jam.
Refer to
jam.
Refer to
jam.
Refer to
jam.
Contents
Error Messages
Corrective Action
page 11 to clear the
page 15 to clear the
page 17 to clear the
page 24 to clear the
page 27 to clear the
46