Emerson Micro Motion 5700 Installation Manual page 36

Wiring the channels
February 2023
4.3.1 Direct connection and star topology
Procedure
1. Feed the RJ45 cable through the conduit on the 5700 transmitter.
2. Connect the RJ45 cable into either Channel A or Channel B.
3. Anchor the cable to the module backplate using a cable tie.
4.3.1 Daisy chain and ring topologies
Procedure
1. Feed two RJ45 cables through the conduits on the 5700 transmitter.
2. Connect the external switch or previous transmitter to Channel A or Channel B.
3. Connect the next transmitter in the network to the unused channel.
4. Anchor the cables to the module backplate using cable ties.
36
Functionality is identical for both Channel A and Channel B as the 5700 transmitter
contains an internal Ethernet switch.
Example
Since two cables will not fit into one conduit, you will need to use separate conduits
for each cable.
Functionality is identical for both Channel A and Channel B as the 5700 transmitter
contains an internal Ethernet switch.
Example
Installation Manual
MMI-20029768
Micro Motion 5700 Ethernet Transmitters