Talking And Listening - Motorola TALKABOUT T47X Series Manual

Attaching and Removing the Belt Clip
1. Attach the belt clip to the belt clip slot at the back of the
radio until the clip clicks in place.
2. Attach the belt clip to pocket or belt strap until the clip
clicks in place.
To Remove
1. Pull the release tab on top of the belt clip to release the
latch.
2. Push the belt clip with the other hand towards the top of
radio.
Turning Your Radio On and Off
1. To turn your radio ON, turn the rotary knob clockwise.
2. In the ON position, the radio chirps and briefly shows all
feature icons available on the radio.
3. The display screen then shows the current channel, code
and all features that are enabled. The radio is now in
Two-Way mode.
4. To turn your radio OFF, turn the rotary knob
counterclockwise.
Setting the Volume
From any mode, to increase volume is by turning
the rotary knob clockwise. To decrease volume, turn
the rotary knob counterclockwise.
DO NOT hold the radio close to your ear. If
Note:
the volume is set to an uncomfortable level, it
could hurt your ear.
14

TALKING AND LISTENING

To communicate, all radios in your group must be
set to the same channel and Interference Eliminator
Code.
1. Press and hold the PTT button to talk. When transmitting,
screen displays icon and blinks
icon. If it is a high power transmission,
displayed. If it is a low power transmission,
displayed. Screen time out except
battery icons. These remains lit until PTT button is
released.
2. When you are finished talking, release the PTT button.
3. When receiving,
shown. If it is a high power channel,
low power channel,
For maximum clarity, hold the radio one inch away
from your mouth and speak directly into the
microphone. Do not cover the microphone while
talking.
Talk Range
Your radio is designed to maximize performance
and improve transmission range. Do not use the
radios closer than 5 ft apart.
icon is
icon is
, / and
icon blinks and
is shown. If it is a
is shown.
is