Internal Voice Operated Transmission/Voice Operated Transmission; Hands-Free Use With Accessories - Motorola TALKABOUT T47X Series Manual

3. Press the PTT button to set the new call tone and exit
Menu or Menu/Lock button to continue set up.
To transmit your call tone to other radios set up to
the same channel and Interference Eliminator Code
on your radio, and press
Setting the call tone to 0 disables the call tone
Note:
feature.
Internal Voice Operated Transmission/
Voice Operated Transmission (
Transmission is initiated by speaking into the
microphone of the radio/audio accessory instead of
pushing the PTT button.
L3 = High Sensitivity for quiet environments
L2 = Medium Sensitivity for most
environments
L1 = Low Sensitivity for noisy environments
1. Press Menu/Lock button until the
appears on the display. When audio accessory is
connected, the icon is shown. The current setting
(Off, L1–L3) flashes.
2. Press or to select the sensitivity level.
18
Call Tone button.
/
icon
3. Press the PTT button to exit Menu or
button to continue set up.
There is a short delay when using iVOX/VOX.
Note:

Hands-Free Use with Accessories (

You can transmit hands-free more reliable with the
use of optional headset accessories. Once
turned on, the radio detects your voice and
transmits when you speak.
)
Many accessories (sold separately) are available for
your radio. For more information, visit our website at
www.motorolasolutions.com/TalkaboutAccessories
or call
1-800-448-6686.
1. Turn the radio off and plug the
accessory port.
2. Turn the radio on.
3. Adjust the volume appropriately by rotating
the volume before placing the accessory on your head
or in your ear.
4. To turn off, simply remove accessory.
Note:
• There is a short delay between the time you start talking
and when the radio transmits. There is a short delay
before the transmission is completed.
• iVOX and VOX do not function when the radio is in FM
mode.
Menu/Lock
accessory into the
shows on the display.
. Lower
)
is