Input Select - Panasonic BT-LH2550 Operating Instructions Manual

Main Menu
(continued)

INPUT SELECT

Sub menu Settings
VIDEO
OFF
ON
FORMAT
AUTO
NTSC
PAL
NTSC SETUP
75
00
SDI1
OFF
ON
SDI2
OFF
ON
YP P /RGB
OFF
B R
ON
MODE
YP
B
RGB-VIDEO
RGB-COMP.
COMPONENT
SMPTE
LEVEL
B75
B00
SELECT SYNC
INT
EXT
COMP.
DVI-D
OFF
ON
MODE
DVI-VIDEO
DVI-COMP.
*1 All five input lines (VIDEO, SDI1, SDI2, YP
inputs ends when the fourth input line is turned off since it will not be possible to turn off the 5th input line also.
*2 "AUTO" is the factory default, but select a specific format when there is risk that the input signal may be
contaminated by outside noise.
36
Description
Turns VIDEO line to the INPUT button on/off.
Selects the video input format.
<AUTO> Automatically selects NTSC or PAL.
<NTSC> NTSC
Selects NTSC setup level.
<75>
<00>
Turns SDI1 line to the INPUT button on/off.
Turns SDI2 line to the INPUT button on/off.
Turns YP
P Selects YP
R
<YP
<RGB-VIDEO> Selects the video RGB signal.
<RGB-COMP.> Selects the PC RGB signal.
Selects YP
<SMPTE>
<B75>
<B00>
Selects the sync signal when using YP
<INT>
<EXT>
Performs analog PC settings. ("COMP."
Turns DVI-D line to the INPUT button on/off.
Selects DVI-D input mode.
<DVI-VIDEO> Selects the RGB signal input of RGB video.
<DVI-COMP.> Selects PC input.
<PAL> PAL
Select this function when using 7.5% setup signals.
(Adjusts the interior of the monitor to the 7.5% setup
level to suit the black level)
Select this when there is no setup signal.
P /RGB line to the INPUT button on/off.
B R
P (component) or RGB input mode.
B R
P > Selects the YP
B R
P (component) signal input level.
B R
Signal level complies with SMPTE and P
0.7 Vp-p at 100% chroma.
Select this when connecting a Betacam or similar
device with a setup function. (Adjusts the interior of
the monitor to the 7.5% setup level to suit the black
level)
Select this when connecting a Betacam or similar
device without a setup function.
Select when the synchronizing signal is
superimposed on the G or Y signal.
Select to synchronize with an external synchronizing
signal.
P /RGB, DVI-D) cannot be turned off. An attempt to turn off all
B R
Underlined values indicate factory defaults.
*1
*2
*1
*1
*1
P signal.
B R
P and RGB-VIDEO input.
B R
page 37)
*1
and P are
B R