Panasonic BT-LH2550 Operating Instructions Manual page 27

Main Menu
(continued)
Sub menu Settings
*2*6
MODE2
I-P MODE
MODE1
*2
OFF
MONO
ON
*2*8
OFF
ANAMO
ON
*2
4:3
SD ASPECT
16:9
*2
NORMAL
SCAN
UNDER
COLOR GAIN R
0 - 30
COLOR GAIN G
0 - 30
COLOR GAIN B
0 - 30
*2 These functions are not available when "RGB-COMP." under "YP
selected in the "INPUT SELECT" menu (
COMP" or "DVI-COMP" is selected. Selecting WIDE1 to 3 for "COLOR SPACE" produces the gamma curve
fixed to that "COLOR SPACE."
*6 To use the "TWO WINDOW" (
1) Change settings after exiting the "TWO WINDOW" function.
2) It is recommended to use "MODE2" for handling fast video.
*8 "SCAN" changes are not reflected in Anamo size display.
IP mode
"MODE1" performs IP conversion using inter-frame interpolation.
The factory default is "MODE1".
"MODE2" performs IP conversion using inter-field interpolation.
Since interpolation is performed inside each field, this mode is suitable for checking interlace status.
Description
Selects IP conversion mode. (
window and sub-window can be set up in the split-screen display of
the "TWO WINDOW" function.
<MODE2> Inter-field interpolation
<MODE1> Inter-frame interpolation
Switches between color and monochrome (MONO).
<OFF> Color
• When ON, the CHROMA setting of the picture/volume adjusting menu
is fixed at 0.
With an Anamo lens and HD-SDI input, the picture is resized to
Anamo magnification (the vertically enlarged signal can be vertically
compressed and corrected for display). This function is not available in
the split screen display of the "TWO WINDOW" function.
Sets the aspect ratio for SD signal input. This function is not available
in the split screen display of the "TWO WINDOW" function.
<4:3> 4:3 display
Sets under-scan and normal display. This function is not available in
the split screen display of the "TWO WINDOW" function.
<NORMAL> Normal display
Fine tunes R component GAIN in split-screen mode and sub-window
display (single screen) of the "TWO WINDOW" function.
Fine tunes G component GAIN in sub-window input in the split-screen
display and sub-window display (single screen) of the "TWO
WINDOW" function.
Fine tunes B component GAIN in sub-window input in the split-screen
display and sub-window display (single screen) of the "TWO
WINDOW" function.
page 36). The gamma curve is set to STANDARD when "RGB-
page 34) function,
page 27, "IP mode") Both the main
<ON> Monochrome
<16:9> 16:9 display
<UNDER> Under-scan
P /RGB" or "DVI-COMP." under "DVI-D" is
B R
27