Panasonic BT-LH2550 Operating Instructions Manual page 17

How to Use the On Screen Menu
TIME CODE display (TC)
CLOSED CAPTION (CC) display
(continued)
• Use the menu to display and set the time code for
HD-SDI signal input. It also allows you to switch
display mode (VITC, LTC, VUB, LUB).
In VITC and LTC display mode:
• Displays the time code in hours: minutes: seconds:
or frames.
• In drop-frame mode, a different delimiter between
seconds and frames is used.
Note:
Read errors are displayed as "--:--:--:--"
( : ) NDF
( . ) DF
In VUB and LUB display modes:
• BG8, BG7, BG6, BG5, BG4, BG3, BG2, BG1 appear
in the stated order. BG: binary group
• The (:) delimiter does not appear.
Note:
Read errors are displayed as "--:--:--:--"
• Display position and character size can be modified
(
"DISPLAY SETUP" menu).
• Use the menu to display and set closed caption
display for VIDEO (NTSC) signals. It also allows you
to select display mode (CC1 to CC4) (
"CLOSED CAPTION" and "MODE SELECT" in the
"DISPLAY SETUP" menu.).
Note:
Closed captions are not available during HV DELAY.
In split-screen display, closed captions appear only
when a VIDEO input line is displayed in the main
window.
page 39, "POSITION" and "FONT SIZE" in the
page 39,
17