Panasonic BT-LH2550 Operating Instructions Manual page 37

Main Menu
(continued)
■ COMP.
Set "RGB-COMP" under "YP
enable the "COMP" menu.
Sub menu Settings
*1
AUTOSETUP
H POSITION
0 - 30 - 60
V POSITION
0 - 30 - 60
PHASE
0 - 16 - 60
CLOCK
700 - 2200
(Factory preset settings:
WXGA/XGA
XGA
WXGA
RESET
*1 Run "AUTOSETUP" when video is displayed across the entire screen area. "EXECUTING" is displayed during
"AUTOSETUP" and "COMPLETE" appears when setup completes.
"INCOMPLETE" is displayed if setup could not be completed.
AUTOSETUP may not provide adequate adjustment for some video input. Use H POSITION, V POSITION,
PHASE and CLOCK to adjust.
*2 Each input format can be adjusted but not when user data is loaded ("SETUP LOAD"
("SETUP SAVE" page 29).
*3 "CLOCK" factory default
FORMAT
640 × 400 (70 Hz)
640 × 480 (60 Hz)
640 × 480 (75 Hz)
640 × 480 (85 Hz)
800 × 600 (60 Hz)
800 × 600 (70 Hz)
800 × 600 (75 Hz)
800 × 600 (85 Hz)
1024 × 768 (60 Hz)
P /RGB" in the "INPUT SELECT" menu and select the "RGB-COMP" input line to
B R
Description
*3
)
CLOCK FORMAT
800 1024 × 768 (70 Hz)
800 1024 × 768 (75 Hz)
840 1024 × 768 (85 Hz)
832 1280 × 768 (50 Hz)
1056 1280 × 768 (60 Hz)
1040 1280 × 768 (75 Hz)
1056 1280 × 1024 (60 Hz)
1048 1600 × 1200 (60 Hz)
1344 1920 × 1200 (60 Hz)
Underlined values indicate factory defaults.
Automatically adjusts RGB-COMP as well as H POSITION,
V POSITION, PHASE and CLOCK settings of input
formats. Selecting this submenu opens a confirmation
screen and setup starts after choosing "YES" in this
screen.
Adjusts horizontal image display position.
Adjusts vertical image display position.
Adjusts the clock phase in 1/32 clock period increments.
Adjusts the sampling clock in dot units.
Switches between XGA (UXGA) and WXGA (WUXGA).
Returns "H POSITION", "V POSITION", "PHASE" and
"CLOCK" settings in the RGB COMP. input compliant
format to their factory defaults.
CLOCK
1328
1312
1376
1648
1680
1712
1688
2160
2080
*2
*2
*2
*2
page 29) or saved
37