Connecting And Setting Up - Panasonic LQ-MD800 Operating Instructions Manual

Discs (continued)
Types of disc for the type of connected
monitor television
When you use the discs recorded either PAL or NTSC, refer to this
table. If you select the same TV system (PAL or NTSC) setting for
this unit and your monitor television as the disc you want to play,
the picture can be clearer.
Type of monitor television
Multi system monitor
television
NTSC monitor television
PAL monitor television

Connecting and Setting up

Put the unit on a stable, horizontal surface where it will not be exposed to excessive dust. Do not block its vents or place where it can
become hot.
First of all, please disconnect AC mains leads of all units, which you are going to connect with before connecting and disconnecting cables.
Reconnect the AC mains leads when all connections are complete. Read the instructions for the other units carefully.
Audio/video input will not be output if this unit is switched off or malfunctions. Consider other connections in the system when outputting
audio/video for the purpose of monitoring input. To record essential material, use multiple units to record at the same time, or make other
similar allowances in your system setup.
Connecting a Monitor television
Composite video, monaural audio terminals
Video cable (BNC)
Audio cable (PHONO)
AC mains lead (supplied)
AUDIO VIDEO
IN IN
S-Video, stereo audio terminals
S-Video cable (4P)
Stereo Audio cable (PHONO x 2)
AC mains lead (supplied)
AUDIO S-VIDEO
IN IN
TV system Yes/No
on discs.
NTSC Yes
PAL Yes
NTSC Yes
PAL No
NTSC Yes* (PAL60)
1
PAL Yes*
2
VIDEO VIDEO IN
~ AC IN
S-VIDEO
Y P B P R
VIDEO OUT
VIDEO
1
S-VIDEO
CH1(A) CH2(B) CH1 CH2
2
AUDIO
AUDIO IN AUDIO OUT MON
DV IN PAUSE RS-232C USB
REMOTE
VIDEO
AUDIO
OUT
MONO
OUT
S-VIDEO
OUT
VIDEO VIDEO IN ~ AC IN
S-VIDEO
Y P B P R
VIDEO OUT
VIDEO
1
S-VIDEO
CH1(A) CH2(B) CH1 CH2
2
AUDIO
AUDIO IN AUDIO OUT
MON
DV IN PAUSE RS-232C USB
REMOTE
AUDIO
OUT
You may be unable to use same functions or they may
function incorrectly if the TV system for the unit is
different to that for the disc.
* If your monitor television is not equipped to handle PAL 525/60
1
signals the picture will not be shown correctly.
* If you set the TV system of this unit to "PAL", the picture may be
2
clearer.
Component video terminals
Component video (BNC x 3)
Stereo Audio cable (PHONO x 2)
AC mains lead (supplied)
AUDIO
IN
To set to progressive output mode
(1) While stopped, press [MENU (SHIFT + SEARCH) ]
to show the MENU window.
(2) Use [ ,
press [ENTER].
(3) Use [ , ] to select the "Connection" and press
[ ] or [ ].
(4) Use [ ,
[ENTER].
(5) Use [ , ] to select "NTSC" and press [ENTER].
(6) Use [ , ] to select "Progressive (NTSC)" and
press [ENTER].
(7) Use [ , ] to select "On" and press [ENTER].
To return to the previous screen
Press [RETURN].
– 12 –
VIDEO VIDEO IN
COMPONENT
Y P B P R
VIDEO IN VIDEO VIDEO OUT
1
Y P P
B R
CH1(A) CH2(B) CH1
2
AUDIO IN AUDIO OUT
DV IN PAUSE
REMOTE
, , ] to select the "SETUP" and
] to select "TV System" and press
~ AC IN
S-VIDEO
S-VIDEO
CH2
AUDIO
MON
RS-232C USB
AUDIO
OUT