Connecting A Microphone; Connecting A Pc - Panasonic LQ-MD800 Operating Instructions Manual

Connecting and Setting up (continued)

Connecting a Microphone

If you record while a microphone is connected, microphone signal
can be recorded in channel 1.
Notes:
• When a microphone is connected, the sound recorded to
channel 2 is that selected in "Audio CH assignment with Mic".
• Use a microphone with the monaural mini plug. When using a
condenser microphone, select the one with built-in batteries.

Connecting a PC

Various controls are available if you connect a computer through
the RS-232C or USB terminals.
RS-232C terminal
RS-232C cable (9P straight)
USB terminal
Type-A
connector
DVD VIDEO RECORDER
OPEN/CLOSE
POWER
4.7
GB
REC
BUSY
CH1 CH2 REMAIN
INHIBIT
MENU REPEAT FUNCTION
SEARCH STATUS
PHONES CH1/MIC CH2
MARKER
STOP REV PAUSE PLAY FWD REC
MIN MAX MIN MAX MIN MAX
ENTER RETURN
MODE LOCK SHIFT
OFF ON
MIC
VIDEO VIDEO IN
S-VIDEO
Y P B P R
VIDEO OUT
VIDEO
1
S-VIDEO
CH1(A) CH2(B) CH1 CH2
2
AUDIO
AUDIO IN AUDIO OUT MON
DV IN PAUSE RS-232C
REMOTE
RS-232C
VIDEO VIDEO IN
S-VIDEO
Y P B P R
VIDEO OUT
VIDEO
1
S-VIDEO
CH1(A) CH2(B) CH1 CH2
2
AUDIO
AUDIO IN AUDIO OUT MON
DV IN PAUSE RS-232C
REMOTE
USB
USB cable
Type-B
connector
Use the following procedures to change the settings if
necessary. For other items, see page 33.
TV screen type (TV Aspect)
The aspect ratio is factory set to 4:3 for a regular monitor television.
You do not have to change this setting if you have a regular 4:3
aspect monitor television.
(1) Turn on the monitor television and select the
appropriate video input to suit the connections to
this unit.
(2) While stopped, press [MENU (SHIFT + SEARCH) ]
to show the MENU window.
(3) Use [ ,
press [ENTER].
(4) Use [ ,
press [ ] or [
(5) Use [ ,
[ENTER].
~ AC IN
USB
(6) Use [ ,
[ENTER].
~ AC IN
USB
To return to the previous screen
Press [RETURN].
For your reference:
Apart from "TV Aspect", other settings also affect how video
appears on your monitor television. Check the following if video
doesn't appear correctly on your monitor television.
• "Connection"–"Norm (4:3) TV Settings (DVD)" or "Norm (4:3) TV
Settings (DVD-RAM)".
• The video setting on the disc.
How video appears is often specified by the disc itself.
• The video settings on your monitor television.
– 14 –
, , ] to select the "SETUP" and
] to select the "Connection" and
].
] to select "TV Aspect" and press
] to select the TV aspect and press
• 4:3 (factory setting)
• 16:9