External Display - Panasonic Toughbook CF-74JCL02AM Reference Manual

External Display

You can switch the output destination to an external display.
Connect the external display to the external display port (A).
NOTE
After resuming from standby or hibernation, or restarting the computer, the output destination may not be the same as
selected in the previous status.
When you change the display after Windows starts up, do not press any key until switching is complete.
You cannot use the simultaneous display until Windows starts up.
Display switching by pressing Fn+F3 may not work when you use the Fast User Switching function to switch the user.
In this case, log off all users and restart the computer.
Simultaneous display and display switching do not work when [Command Prompt] screen is set to "Full Screen".
Do not connect or remove the external display during standby or hibernation.
It may take some time to switch between displays depending on the displays used.
When you use high resolution displays, the display color, resolution or refresh rate may be changed, switching to
®
[Notebook] in [Intel
We recommend you to switch the output destination by pressing Fn+F3.
When you use the external display only, set the suitable number of colors, resolution, or refresh rate separately from
when you use the internal LCD only or when you use the simultaneous display.
Depending on the settings, some external displays may be distorted or may not display the mouse cursor correctly. In
this case, set the settings to lower value.
When you use the simultaneous display, DVD-Video, MPEG files and other motion image files may not be played back
smoothly.
Carefully read the instruction manual of the external display.
When connecting an external display that does not conform to the Plug & Play standards, select the display driver
accordingly in the following menu, or use the driver disc supplied with the monitor.
[start] - [Control Panel] - [Appearance and Themes] - [Display] - [Settings] - [Advanced] - [Monitor] - [Properties] -
[Driver] - [Update Driver]
If a picture is not displayed normally, lower the level of [Hardware acceleration] in the following menu.
[start] - [Control Panel] - [Appearance and Themes] - [Display] - [Settings] - [Advanced] - [Troubleshoot]
If you connect an external display via the mini port replicator (CF-VEBU06W), the output switches to the mini port rep-
licator from the external display port.
Graphics Media Accelerator Driver for Mobile].
44