Table of Contents
Advertisement
•
Make sure that the airflow is sufficient in the work
area when operating the product indoors.
Noise safety
WARNING:
instructions that follow before you use the
product.
•
High noise levels and long-term exposure to noise
can cause noise-induced hearing loss.
•
To keep the noise level to a minimum, do
maintenance on and operate the product as given
in the operator's manual.
•
Use approved hearing protection while you operate
the product.
•
Listen for warning signals and voices when you use
hearing protection. Remove the hearing protection
when the product is stopped, unless hearing
protection is necessary for the noise level in the work
area.
Personal protective equipment
WARNING:
instructions that follow before you use the
product.
•
Always use approved personal protective equipment
when you operate the product. Personal protective
equipment cannot fully prevent injury but it
decreases the degree of injury if an accident does
occur. Let your dealer help you select the correct
personal protective equipment.
•
Regularly do a check of the condition of the personal
protective equipment.
•
Use an approved protective helmet.
•
Use approved hearing protection.
•
Use approved respiratory protection when operating
the product indoors.
•
Use approved eye protection with side protection.
•
Use protective gloves.
•
Use boots with steel toe-cap and non-slip sole.
•
Use approved work clothing or equivalent close-
fitting clothing that has long sleeves and long legs.
Fire extinguisher
•
Keep a fire extinguisher near during operation.
•
Use a powder fire extinguisher of "ABE" class or a
carbon dioxide fire extinguisher of "BE" type.
Safety devices on the product
WARNING:
instructions that follow before you use the
product.
1661 - 002 - 13.03.2023
Read the warning
Read the warning
Read the warning
•
Do not use a product with safety devices that are
damaged or do not operate correctly.
•
Do a check of the safety devices regularly. If the
safety devices are damaged or do not operate
correctly, speak to your Husqvarna service agent.
•
Do not make modifications to safety devices.
To do a check of the stop button
1. Start the product. Refer to
page 12 .
2. Push the "STOP" button.
3. If the motor does not stop, let an approved service
center do servicing on the product.
Vibration damping units
The vibration damping units decrease vibration in the
product. The vibration damping units decrease harmful
vibrations to prevent injury to the operator and damage
to the product.
To do a check of the vibration damping units
There are 4 vibration damping units, 2 on the left side
and 2 on the right side of the product.
•
Make sure that the vibration damping units are
correctly installed.
•
Examine the vibration damping units for damages
and wear.
•
Replace the vibration damping units if it is
necessary.
Battery safety
WARNING:
instructions that follow before you use the
product.
To start the product on
Read the warning
9
Advertisement
Table of Contents
