Husqvarna LFe 60 Operator's Manual page 12

State of charge
Sufficiently charged.
The battery power is low.
The battery is empty. The battery
status indicator flashes. Charge the
To charge the bat-
battery. Refer to
tery on page 15 .
Water tank
For LFe 60 there is an optional water tank for
compaction of asphalt.
CAUTION:
than water to the water tank. Other fluids
can cause damage to the product and be
harmful to the environment.
To start the product
1. Put the battery in the battery holder. Make sure that
the battery is correctly installed. Refer to
the battery on page 15 .
2. Push the "STOP" button (A).
C
B
D
3. Push the "POWER" button (B). The power indicator
(C) becomes green.
12
Symbol in the
status indicator
Do not add other fluids
To install
A
4. Push the "START" button (D).
To stop the product
Do 1 of the procedures that follow to stop the product.
• Push the "STOP" button (A) to stop the product. The
power indicator (B) goes off.
• Push the "POWER" button (C) to stop the product.
The power indicator (B) goes off.
To operate the product
CAUTION:
forward. Rearward movement prevents
correct function of the eccentric element and
can cause product failure.
1. Hold the handle and push the product forward.
CAUTION:
down. Too much pressure can cause
unsatisfactory result.
2. To change direction, turn the product around.
B
C
A
Always operate the product
Do not push the product
1661 - 002 - 13.03.2023