Advertisement
What?
How?
To clean light soiling off the surfaces:
1. Wipe with a damp cloth and a solution of hot
Catalytic
water and mild detergent or an ammonia-
based cleaner.
panels
(OB60SL9
2. Wipe dry with a soft cloth.
models
only)
• Remove everything from the oven: all shelves and
trays, the side racks, the catalytic panels.
Oven
1. Remove the oven door (see instructions on
cavity
following pages).
(OB60SL9
2. Wipe the inside of the oven using a household
models
detergents or an ammonia-based cleaner.
only)
3. Wipe clean with a damp cloth and allow to dry
completely.
• To clean light soiling off the enameled surfaces:
1. Wipe with a damp cloth and a solution of hot
Oven
water and mild detergent or an ammonia-
based cleaner.
cavity
(OB60SL11
2. Wipe dry with a soft cloth.
models
only)
https://producthelp.fisherpaykel.com/Manuals/Companion_Product_Manuals/User_Guides/590915A_Built-In_Oven_Pyrolitic/1...
• To clean stubborn, 'baked on' soiling run
the oven on Fan Grill at 200°C for 1.5
hours to enhance the catalytic panel
cleaning function.
• To clean stubborn, 'baked on' soiling or
the whole oven cavity:
use the Self Clean function. See 'Using
the Self Clean function' for instructions.
Important!
• These panels are normally 'self-
cleaning' because their special enamel
breaks down greasy splatters when
the oven is used for 'non-greasy'
baking, especially at high
temperatures.
• Do not use oven cleaner on the
catalytic panels. If you wish to use
oven cleaner on any other part of the
enameled cavity, first remove the
catalytic panels.
• Do not immerse catalytic panels in
water.
• Never use scourers, brushes,
abrasives or cleaners with acid or
alkali content on the catalytic panels.
• To prevent soiling from becoming
'baked on' and stubborn, we
recommend removing any easy-to-
reach spills, food or grease stains from
the enameled surfaces after each use.
• To make wiping out the oven easier
you may remove and the oven door.
See the following pages for
instructions.
• To make cleaning the oven ceiling
easier, the grill element can be
lowered. See following pages for
instructions.
• To prevent soiling from becoming
'baked on' and stubborn, we
recommend removing any easy -to-
reach spills, food or grease stains from
the enameled surfaces after each use.
Doing so will reduce the need for using
the Self Clean function frequently.
• Always remove the side racks before a
Self Clean cycle
• To make wiping out the oven easier
Updated: Sun, 09 Apr 2023 02:23:38 GMT
Powered by
3
Advertisement
