AEG ABSOLUTECARE 9000 User Manual page 23

as shown in the next drawing) for
some seconds until the display
shows the default level C04 and the
indicator goes on. It means the
water softener is active during
washing only.
4. Touch repeatedly the Temperature
button until the desired level appears
(from C01 to C07).
5. Touch the Start/Pause button to
confirm your choice and exit the
menu.
How to set the water softener
also during rinse phase
The factory setting allows to soften the
water during washing phase only. This
setting satisfies most of the use
condition. However, if the inlet water is
particularly hard (C06 and C07 levels),
Water hardness levels
Levels Water hardness range
°f
(French de‐
grees)
C01
C02 6 - 13
C03 14 - 21
1) 22 - 29
C04
C05 30 - 37
C06 38 - 45
C07 ≥46
1) Factory setting, able to satisfy most of the use conditions.
°d
(German de‐
grees)
≤5 ≤3
4 - 7
8 - 11
12 - 16
17 - 20
21 -25
≥26
we suggest to set the water softener also
during rinsing phase to preserve the
fabric softness.
Once you have entered the menu by
pressing Temperature and the Spin
buttons:
1. Touch the Spin button. The
on.
This setting increases
the salt consumption.
2. Touch the Start/Pause button to
confirm your choice and exit the
menu.
How to deactivate the water
softener
Once you have entered the menu by
pressing Temperature and the Spin
buttons:
1. By touching the Spin button twice,
the water softener is excluded
completely. The indicator
go off and the
the display.
2. Touch the Start/Pause button to
confirm your choice and exit the
menu.
°e
(English de‐ mmol/l
grees)
≤ 4 ≤0.5
5 - 9 0.6 - 1.3
10 -15 1.4 - 2.1
16 - 20 2.2 - 2.9
21 - 26 3.0 - 3.7
27 - 32 3.8 - 4.5
≥33 ≥4.6
ENGLISH 23
goes
and
appears in
ppm
≤ 50
60 - 130
140 - 210
220 - 290
300 - 370
380 - 450
≥460