Panasonic KX-FLB756 Operating Instructions Manual page 5

Flat-bed multi-function laser fax
Table of Contents

Advertisement

CAUTION:
Laser radiation
G
The printer of this unit utilizes a laser. Use
of controls or adjustments or performance
of procedures other than those specified
herein may result in hazardous radiation
exposure.
DANGER-Invisible laser
radiation when open and
interlock defeated.
AVOID DIRECT EXPOSURE
TO BEAM.
Caution:
Do not touch the bottom of this
cover. It is very hot.
Fuser unit
G
The fuser unit is inside of the unit and gets
hot. Do not touch it when removing
jammed paper or cleaning the lower glass.
Fuser
unit
For fax advantage assistance, call 1-800-435-7329.
Safety instructions
Toner cartridge
G
Be careful of the following when you
handle the toner cartridge.
— Do not leave the toner cartridge out of
the protection bag for a long time. It will
decrease the toner life.
— If you ingest any toner, drink several
glasses of water to dilute your stomach
contents, and seek immediate medical
treatment.
— If any toner comes into contact with
your eyes, flush them thoroughly with
water, and seek medical treatment.
— If any toner comes into contact with
your skin, wash the area thoroughly
with soap and water.
Drum unit
G
Read the instructions on pages 13 and 14
before you begin installation of the drum
unit. After you have read them, open the
drum unit protection bag. The drum unit
contains a photosensitive drum. Exposing
it to light may damage the drum.
Once you have opened the protection bag:
— Do not expose the drum unit to light for
more than 5 minutes.
— Do not touch or scratch the green drum
surface.
— Do not place the drum unit near dust or
dirt, or in a high humidity area.
— Do not expose the drum unit to direct
sunlight.
Static electricity
G
To prevent static electricity damage to the
interface connectors (parallel and USB),
the ADF jack or other electrical
components inside the unit, touch a
grounded metal surface, such as the metal
part under the parallel interface connector
before touching the components.
Metal part
5

Advertisement

Table of Contents
loading

Table of Contents