Table of Contents
Advertisement
Advanced features
How to set menu options
1. Press p.
2. Press ( or ) until the following is
displayed:
then press w and press ( or )
until the desired feature is displayed.
Programming table (cont.)
Code
Feature & Display
Setting the Error Correction
Mode (ECM)
ECM SELECTION
#68
MODE=ON
To send a fax even if there is static
interference on the telephone line.
Setting the connecting tone
CONNECTING TONE
MODE=ON
If you often have trouble when
#76
sending a fax, this feature allows
you to hear connecting tones: fax
tone, ring back tone and busy tone.
Saving on toner consumption
TONER SAVE
#79
MODE=OFF
Resetting advanced features to
their default settings
SET DEFAULT
#80
RESET=NO
(cont.)
ADVANCED MODE
PRESS SET
[±]
[±]
[±]
[±]
Features Summary
!
3. Press + or - until the desired setting is
displayed.
4. Press w.
5. Press p.
Note:
Step 3 may be slightly different depending on the
G
feature.
See page 60 for more details.
G
Settings
This feature is available when the
transmitting/receiving stations are
ON
ECM compatible.
OFF
You can confirm the status of the
other party's machine.
ON
If the ring back tone continues, the
G
other party's machine may not be
a facsimile or may have run out of
paper. Check with the other party.
OFF
The connecting tone volume
G
cannot be adjusted.
"ON": The toner cartridge will last
ON
longer.
This feature may lower the print
G
OFF
quality.
1. Follow steps 1 and 2 above.
2. Press
YES
3. Press
4. Press
5. Press
NO
(The default setting is in bold type.)
How the unit operates
+
-
or
to select "YES".
w
.
w
again.
p
.
65
Advertisement
Table of Contents
