Table of Contents
Advertisement
Sending Faxes
Broadcast
This feature is useful for sending the same document to selected parties (up to 20 entries).
First program the entries, then see page 37 for transmission.
The broadcast function utilizes stations 1–3. The one-touch dial function will be canceled.
a key 1 and 2 can accept one-touch dial and navigator entries.
HI key can also accept manual dialing entries.
Programming entries into the broadcast memory
Press p repeatedly until the following
1
is displayed.
Display:
2
For BROADCAST 1–2:
Press the desired a key.
Example:
Press + or - to select "BROADCAST".
Example:
For MANUAL BROADCAST:
Press HI.
Press + or - to select "MANUAL BROAD".
Press w.
3
4
Program entries.
Using stations 1–6:
Press the desired station key.
Example:
Using stations 7–12:
Press o, then press the desired
station key.
Using navigator directory:
Press + or - until the desired entry is
displayed and press w.
34
transmission!
DIRECTORY SET
PRESS STATION OR
/
DIRECTORY SET
PRESS NAVI.[
STATION 1
DIAL MODE
STATION 1
BROADCAST
STATION 3
DIAL MODE
STATION 3
MANUAL BROAD [±]
DIR=
NAVI.[+@-]@&@SET
DIR=ANN
NAVI.[+@-]@&@SET
Using the dial keypad (only for
MANUAL BROAD):
Enter the fax number and press w.
Example:
I H
]
To program other entries, repeat
this step (up to 20 entries).
[±]
Press w after programming all of
5
the desired entries.
[±]
[±]
To program another broadcast key,
repeat steps 2 to 5.
[00]
Press { to exit the program.
6
BROADCAST
[01]
Note:
If you program the wrong entry, press {
after step 4 to erase the entry.
Confirm the stored entries by printing a
broadcast programming list (p. 75).
DIR=3456789
!
DIR=3456789 [01]
NAVI.[+@-]@&@SET
REGISTERED
!
DIRECTORY SET
PRESS STATION OR
/
DIRECTORY SET
PRESS NAVI.[
MANUAL BROAD
MENU
LOWER
Station keys
I H
]
SET
STOP
Advertisement
Table of Contents
