Reversing The Appliance Door - Hoover BI SD 177 User Manual

Reversing the appliance door

We recommend you seek the help of another individual to support the doors whilst performing
this operation. Always wear adequate PPE (Personal Protective Equipment) for the task at hand.
Prepare a surface with a soft, clean towel or similar where you can place the door during these
steps
Ensuring the door seals correctly:
It is normal for the seal to be compressed after the door has been reversed. With the door closed,
use a hair dryer to expand the seal and fill the gap between the door and the body of the
appliance.
Take care not to use the hair dryer too close to the appliance, which could damage the seal. A
distance of approximately 10cm should be adequate.
When completed, allow the seal and door to cool before touching them. Once done, the seal
should remain in position.
18