Pc Interface Unit - HP 85097A User Manual

PC Interface Unit

The PC interface unit (shown in the center of
the digital control for the ECal modules. It can control up to two
modules and contains circuitry that supplies power to the ECal module
control ports only when modules are connected. It automatically turns
the power off when you disconnect an ECal module.
If you have an HP 8506XA module, a jumper can be installed to make it
NOTE
compatible with the PC interface unit. Contact the nearest HP sales or
service office for information about returning your module for this
modification. Sales and service offices are listed on
Figure 1-1 HP 85097A PC Interface Kit Contents (ECal module not
pictured)
Table 1-2 HP 85097A PC Interface Kit Replaceable Parts
Description
PC Interface Unit
PC Interface Software
Electronic Calibration System User's Guide
Power Supply
Shielded DB25 Cable
Chapter 1
General Information
Figure 1-1) functions as
page 5-5.
Quantity HP Part Number
1 85097-60002
1 (2 disk set) 85097-10001
1 85091-90007
1 0950-3331
3 8120-8710
ECal System
1-7