Panasonic WV-NP244 Operating Instructions Manual page 21

Configure the settings relating to SD memory card [SD memory card]
Click the [SD memory card] tab on the "Basic setup" page. (☞ page 16)
The settings relating to the SD memory card can be configured on this page.
[About SD memory card]
Select "Use" or "Not use" to determine whether or not to
use the SD memory card.
Important:
• Before removing the SD memory card from the cam-
era, it is necessary to select "Not use" first.
• After inserting the SD memory card, it is necessary
to select "Use" to use the SD memory card.
[Notification for SD memory card]
When the "E-mail notification" function or the
"Panasonic alarm protocol" function is used to notify of
the remaining space of the SD memory card, select a
timing to be notified from the following. Notification will
be made when the remaining space of the SD memory
card reached the value selected from the following.
50%/20%/10%/5%/2%
Default: 50%
Notes:
• When "50%" is selected, notification will be made
each time the remaining space reaches 50%, 20%,
10%, 5% and 2%.
• Notification may not always be made at a very
moment when the remaining space of the SD mem-
ory card reached the selected value.
[SD memory card]
Available size and the total size of the SD memory card
will be displayed.
Depending on the state of the SD memory card, the size
indications will differ as follows.
Indication Description
--------KB/--------KB No SD memory card is inserted.
Failed to obtain available size
due to error, etc.
********KB/********KB The SD card memory is unfor-
matted, or locked, etc.
Note:
When the available size reached "0 KB", images will
not be saved on the SD memory card. When the "E-
mail notification" function is on, notification mail will
be sent to the registered addresses when the SD
memory card becomes full. (☞ page 33)
[Format]
To format the SD memory card, click the [Execute] but-
ton.
Important:
• Before formatting the SD memory card, it is neces-
sary to select "Use" for "About SD memory card" on
the [SD memory card] tab of the "Basic setup" page
and "OFF" for "FTP periodic transmission" on the
[FTP] tab of the "Network setup" page (☞ page 43).
• Format the SD memory card only by clicking the
[Execute] button on the setup menu. Otherwise, the
following functions using the SD memory card may
not work properly with this camera.
• Save/obtain images when failed to transmit to
the FTP server using the FTP periodic transmis-
sion function
• Save/obtain the system logs
• It is recommended to use Panasonic's SD memory
card. Otherwise, the camera may not work properly
or performance deterioration may be caused.
• It is impossible to access the SD memory card in the
process of formatting.
• All data saved on the SD memory card will be delet-
ed when the SD memory card is formatted.
21