Hunter 44668 Manual
Thermostat
Hide thumbs
Also See for 44668:
- Owner's manual (100 pages) ,
- Manual de usuario (50 pages) ,
- Installation manual (2 pages)
Advertisement
Quick Links
This guide will make installation and programming
your new thermostat simple and fast. In just a few
minutes, you can have the Comfort Saver with Room
Control installed, programmed and ready to go. Videos
showing each step of installation and programming
are available at www.hunterfan.com/comfortsaver. Of
course, if you have additional questions, please call
our help line at 1-888-830-1326 from 7:00 am to 7:00
pm Monday – Friday or 8:00 am to 5:00 pm (Central)
on Saturday. You may also contact us online at www.
hunterfan.com.
©2009 Hunter Fan Company
Before you Begin
Gather all tools necessary to complete your installation
before removing the old thermostat.
To install your thermostat you should have the
following tools:
Slotted Screwdriver
Phillips Screw Driver
Electric Drill and 3/16" drill bit
Hammer
Four 1.5v (AA) size alkaline batteries
Unpack your new Hunter
components are present in the Accessory Pack. This
includes:
2 - #8 slotted screws
2 - wall anchors for mounting
1 - sheet of terminal labels
1 - jumper wire
1 - thermostat with mounting plate.
44668 ThermosTaT
thermostat and ensure all
®
43078-01 • 12/18/08
Advertisement
Related Manuals for Hunter 44668
Summary of Contents for Hunter 44668
-
Page 1: Before You Begin
1-888-830-1326 from 7:00 am to 7:00 pm Monday – Friday or 8:00 am to 5:00 pm (Central) on Saturday. You may also contact us online at www. Unpack your new Hunter thermostat and ensure all ®... - Page 2 44668 tHermostat How to unistall old tHermostat and install new Hunter tHermostat Note: Most thermostats are low voltage, and present 2.Remove the wires one at a time and label them no threat to you during the uninstallation or installation with the labels provided with the Accessory Kit. For process.
-
Page 3: Installing Your
44668 tHermostat How to unistall old tHermostat and install new Hunter tHermostat Note: Make sure to bend your wires to one side so 5. Insert the wall anchors and tap them into place you do not loose them in the wall. - Page 4 44668 tHermostat How to unistall old tHermostat and install new Hunter tHermostat Next you will need to insert the rest of the wires into The “G” labelled wire will go into the “G” terminal. the terminals with the appropriately marked wires: Tighten the screw securely.
-
Page 5: Setting Current Time And Day
Punch the button We are now ready to program the Hunter thermostat until you reach the correct minutes setting. You have and start to save. now set the correct time of day. - Page 6 Use the to adjust this as well. Your Hunter thermostat comes with a couple of other You’ve now set period one to be the same for all five programming options, one of which is individual day working days. You can now press the...
- Page 7 Setting Home today and Hold Here we will discuss a couple other of the most commonly used features on your Hunter thermostat. The first being Hunter’s patented ”Home Today” feature. This allows you to temporarily reprogram the thermostat for the day, to your set comfort temperature until you go to bed at night, where it will change back to your normal programming.
- Page 8 Congratulations, you have now completed the temperature in your bedroom to drive the thermostats installation and programming of your Hunter remote operation and not a remote location in the house sensor. Keep in mind, you do not have to use the where the thermostat is mounted.