Make Conversion Settings When; Writing An Image - Panasonic PT-L735NTU User Manual

Use of Image Creator 1.0A
Make conversion settings when writing an
image.
You can specify how to convert images when saving
images onto the SD card or into other folders on the
"Setup screen" displayed by choosing "Setup" from the
"Setup" menu or on the "JPEG quality" adjustment slide
bar on the main screen.
"JPEG conversion format" check box
If you select this check box with "
into DCF format upon saving. If the "
name shown under each image on the thumbnail screen.
For details of DCF standard, refer to "DCF standard" on page 65.
Note:
When a file is saved onto the SD card, it is forcefully converted into DCF format.
"Create a thumbnail" check box
If you select this check box with "
created in JPEG format and embedded into the image file upon saving.
Note:
When a file is saved onto the SD card, a thumbnail is forcefully created.
"JPEG quality" adjustment slide bar
You can adjust the quality (compression ratio) of a JPEG image to be saved using
"Save to the SD card" or "Save to the other folder" button.
If you choose higher quality, a file becomes larger; if you choose lower quality, a file
becomes smaller. (The size of the lowest quality file is about one fifth of that of the
highest quality.)
Note:
The JPEG format is suitable for natural pictures such as photographs. For
presentations created with PowerPoint and illustrations made with graphic
software, there may be significant loss of picture quality even if you choose a
higher quality.
", the file and directory names will be converted
" mark is not given, files will be saved in the
", a reduced image (i.e., a thumbnail) will be
63