Other Functions; Searching Projector; Registering Projector; Deleting Projector - Panasonic PT-L735NTU User Manual

Use of Wireless Manager 3.0

Other functions

Searching projector

This function is not required when Simple Connection
is used. The function becomes necessary when
Simple Connection is not used or if two or more
projectors are used.
Go to [Option] and specify the projector in
[Selection of projector].
[Search]:
The user can use this function to search the
projectors that are available for connection.
However, projectors subject to search are limited
to those within the same network.
Projectors that are not powered cannot be
searched.

Registering projector

Once a projector is registered, the next time the user can omit the procedure to
connect to the same projector.
If Simple Connection is used, the projector will be automatically registered. If Simple
Connection is not used, connection will be made to currently registered projector.
If two or more projectors have been registered, the one at the top in the registration
(or the projector connected on the previous occasion) will be specified the first for
connection. If any projector is not detected by the search, the user may use the [Add]
button to directly enter the IP address of the projector.
The host name to identify the projector will be automatically sent from the projector
and displayed. The host name should be set on the projector side.

Deleting projector

This function deletes the specified projector from the registration.

Confirming connection

This function checks the condition of connection to registered projectors.
44