Capturing Presentation Files Created With Microsoft Powerpoint97/2000/2002 - Panasonic PT-L735NTU User Manual

Use of Image Creator 1.0A
Capturing presentation files created with
Microsoft PowerPoint97/2000/2002
(1) Press the [Capture slide] button and select your
desired presentation files, so an [Open] windows
will appear. In the [File location] menu, or using
the folder icon, move to the location in which your
desired presentation files for conversion exist.
Select the presentation files and press the [Open]
button.
Note:
Only presentation files saved in PPT format (with a .ppt extension) can be
captured. A file saved in other format (e.g. a file with a .pps extension) should be
opened with PowerPoint and saved in PPT format.
(2) Press "Convert and save" button to save the
captured image files onto the SD card or other
folders.
To capture all slides in the presentation file:
Press the [Capture all] button.
To capture only desired slides one by one:
Press the [Previous slide] or [Next slide] button
to view the desired slide, and then press the [Capture] button.
Press the [Stop/End] button when all captures are complete.
Notes:
• Press the "Cancel/Exit" button if you want to stop the process of "Capture all".
• All captured slides are converted so that the aspect ratio will be 4:3. Slides with
other aspect ratio than 4:3 will not be reproduced in correct image.
• Some slides created with PowerPoint97 may cause an error during their
converting process. If this occurs, you can solve the problem by converting the
slides with the PC that has PowerPoint2000 installed.
• If image files are pasted in combined PowerPoint 97 and Windows 98, normal
conversion is not available.
60