Wireless Simple Connection (live mode)
When connecting the projector and the personal computer one-to-one by wireless,
selection of the Simple Connection mode using the supplied wireless card and the
optional wireless card (product No. ET-CDWL2E) will automatically execute IP
address, communicate mode, and other necessary settings.
Notes:
• If the abovementioned optional wireless card is not used in your system, Simple
Connection is not available with Windows Me/98SE. In addition, the previous
network settings cannot be restored with Windows 2000. If your personal
computer has already been connected to the network, resetting is required. (See
page 30)
• All operations are not guaranteed on all wireless cards or PC-integrated wireless
LAN adaptors even with Windows XP.
• Other network adaptors cannot be used when the system is in Simple
Connection.
Operations on the projector
1
Insert the supplied wireless card into the projector.
(See page 11)
Use only the supplied card in the projector; other card cannot be used.
2
Turn ON the power supply of the projector.
3
Select [NETWORK] using the [RGB] button.
4
Press the [MENU] button, display
the NETWORK SETUP screen using
the [
] buttons, and press the
[
] button.
5
Select [Simple Connection] using
the [
] buttons and select [ON]
using the [
Note:
When the network settings are kept in the default conditions, you can skip the
above steps 4 and 5.
] buttons.
21