Monitoring feature
This feature allows you to monitor the
room where a unit is located. The
monitored unit does not ring, allowing you
to easily monitor a baby's room, for
example, from different areas of the
house.
You can monitor:
– the sound in a room ("Audio monitor",
page 53)
– the image and sound of a room ("Video
monitor using the handset", page 54).
Note:
L You can place the handset on the
charger while monitoring using the
speakerphone.
Enabling monitoring access
Y
o
To use the monitoring feature, you need to
set the destination unit to be monitored
beforehand.
– "Permit": allows the unit to be
monitored.
– "Deny": denies access from other units.
Handset
1
{MENU} (F2) i x i {SELECT}
2
"Monitor access" i {SELECT}
3
Select the desired setting. (Default:
"Deny") i {SAVE} i {OFF}
Base unit
1
{MENU} i h i {SET}
2
"Monitor access" i {SET}
3
Select the desired setting. (Default:
"Deny") i {SET} i {STOP}
For assistance, please visit http://www.panasonic.com/phonehelp
Audio monitor
This feature allows you to listen to the
audio in the room where the handset or
base unit is located.
Before using this feature, allow access
to the destination unit by selecting
"Permit" in the monitor access setting
(page 53).
Monitoring audio in the room
Y
o
Handset
1
{MENU} (F2) i H i {SELECT}
2
"Audio only" i {SELECT}
3
Select the desired unit. i {SELECT}
L You can listen to the audio.
4
Press {OFF} to stop monitoring.
Note:
L To start monitoring quickly, press
{INTERCOM}, then press {*} instead
of steps 1 and 2.
Base unit
1
{MENU} i F i {SET}
2
Select the desired unit. i {SET}
L You can listen to the audio.
3
Press {INTERCOM} to stop monitoring.
Note:
L To start monitoring quickly, press
{INTERCOM}, then press {*} instead
of step 1.
F
Monitoring
53