Table of Contents
Advertisement
Using the base unit o
1
Dial the phone number.
L To correct a digit, press {ERASE}.
2
{SP-PHONE}
L An available line is automatically
selected and {LINE1} or {LINE2}
lights.
3
When the other party answers, speak
into the MIC.
L Speak alternately with the other party.
4
When you finish talking, press {SP-
PHONE}.
Note:
L You can also select a line by pressing
{LINE1} or {LINE2} in step 2.
L To change the line selection, see page
74.
L Use the speakerphone in a quiet
environment.
L While on a call, you can switch from the
base unit to the handset by pressing
{LINE1} or {LINE2} on the handset,
then pressing {SP-PHONE} on the base
unit.
Adjusting the speaker volume
Press {^} or {V} while talking.
Making a call using the redial list
The last 10 phone numbers dialed are
stored in the redial list.
1
{REDIAL}
2
Press {^} or {V} to select the desired
number.
L To erase the displayed number, press
{ERASE}.
3
{SP-PHONE}
For assistance, please visit http://www.panasonic.com/phonehelp
C
Making/Answering Calls
PAUSE button (for PBX/long distance
service users)
A pause is sometimes required when
making calls using a PBX or long distance
service.
For example, if you need to dial the line
access number "9" when making outside
calls with a PBX:
1
{9} i {PAUSE} i Dial the phone
number.
2
{SP-PHONE}
Note:
L A 3.5 second pause is inserted each
time {PAUSE} is pressed. Press
repeatedly to insert longer pauses.
31
Advertisement
Table of Contents
