Table of Contents
Advertisement
Configure the settings relating to monitors [Monitor]
The settings relating to the display of the main monitor or sub monitor connected to the recorder and the moni-
tor of the PC connected via a network are configured on the setup menu - the "Advanced setup" menu - the
"Monitor" page.
The settings relating to image switching such as multiscreen display and sequence display of live images are
also configured on this page.
The "Monitor" page has 3 tabs; the [Main monitor] tab, the [Sub monitor] tab and the [Advanced setup] tab.
Set up the main monitor [Main monitor]
Perform settings relating to the main monitor display such as the display position of the camera title.
■ Camera title
[Display]
Determine whether or not to display the camera title
on the main monitor.
On: Displays the camera title.
Off: Does not display the camera title.
Default: On
[Position]
Select the position to display the camera title on
images.
L-Upper/ L-Lower/ R-Upper/ R-Lower
Default: R-Upper
[Camera title]
Enter a camera title to display for each camera using
the on-screen keyboard (☞ page 10). (Up to 14 char-
acters)
Note:
•
When using together with the date and time dis-
play to be set on the camera (☞ page 23) or OSD
(Display Title, ☞ page 25), adjust the position to
be displayed to not to overlap with them.
•
The camera title configured on this setting will not
be embedded on recorded images.
49
Advertisement
Table of Contents
