Table of Contents
Advertisement
Event action
Alarm action
Sound the buzzer
Outputs alarm signals
Display event information on
the main monitor
Display the alarm icon on a
web browser
Display the alarm message
on a web browser
3
Record the alarm logs*
Send a mail that notifies of
an event occurrence
Provide an alarm notification
to a PC according to the
Panasonic alarm protocol
setting
Display the images on a
1-screen when an alarm
occurs
*1 ○: Takes action regardless of the setting, ●: takes action in accordance with the setting, ×: takes no
action
*2 Since the face matching function is not performed when "Mode" - "Advanced face matching alarm set up"
is set to "Off", there is no entry made into the log either.
*3 When "On" is selected for the "Attach alarm information" setting of the camera, i-VMD type information will
be displayed in the alarm log. For further information, refer to the operating instructions of the camera in
use.
Stop buzzer beeping
The buzzer sounding to announce an alarm or error can be stopped from the recorder's front panel.
Step 1
Press the [BUZZER STOP] button.
ERROR
REC
OPERATE
ALARM
BUZZER STOP
COPY
MOUSE
The buzzer will stop.
→
→
Description
The buzzer will start sounding for the duration set in
advance.
Output signals will be sent from the ALARM/CONTROL
connector at the rear of the recorder.
The event type and terminal/camera number will be
displayed on the status display panel. At the same time,
the alarm button turn red.
The alarm icon will be displayed on the event error
display area of the web browser.
A window that notifies of an event occurrence will be
displayed on the web browser.
*
The alarm message displayed last has priority. To close
the window, click the [x] button.
Date & time of the event and event information will be
recorded in a log list.
An e-mail notifying of the event and its date & time (alarm
mail) will be sent to registered e-mail addresses (up to 4).
When an event occurs, a notification will be sent to a PC
in accordance with the settings made under [Panasonic
alarm protocol]. (☞ Page 41, 57)
Display the images recorded by the camera associated
with the alarm number on a 1-screen
121
Note:
•
The buzzer can also be stopped by canceling the
alarm action or error action. (☞ Page 122) The
[BUZZER STOP] button does not reset any of the
other alarm actions.
1
Mode*
A
B
C
D
×
×
●
●
×
×
●
●
b
×
b
×
b
b
b
×
×
×
●
●
2
●
●
●
●*
×
×
●
●
×
×
●
●
×
×
●
●
Advertisement
Table of Contents
