Panasonic WJ-NV300K/GJ Operating Instructions Manual page 37

Set the black and white switchover of the camera [Day & Night (electrical)]
Select the day and night setting for each camera and transmit the information to the cameras to change the
camera settings.
Clicking the [Setup >] button for "Day & Night(electrical)" on the [Camera setup] tab will display the setup win-
dow.
[Day & Night(electrical)]
Select a method of how to switch between B/W
image and color image from the following.
Off: Color images will always be displayed.
Auto: Color images will be switched to B/W
images when the lighting intensity around the
camera becomes approx. 1.0 lx or less. It may
take time until color images are switched to
B/W images.
■ Camera Selection
Select the camera to which the setting of the "Day &
Night(electrical)" is to be sent.
Mark the checkbox of the camera to which the setup
information is to be transmitted.
[Transmission] button
Transmit the setting of the "Day & Night(electrical)" to
the camera.
Once transmission is completed and the setting has
been applied to the camera, "OK" will be displayed in
the "Results" field.
If the display reads "Authentication error", etc., the
camera connection or the setting may have failed.
[Back] button
Click the button after completing the settings.
The screen returns to the [Camera setup] tab.
37