North Star M157595BE Owner's Manual page 26

If using water tank:
Follow these instructions when supplying water from the feed tank:
1. Ensure that you have the tank feed ball valve OPEN, and the city tap water
2. Make sure the water in your tank is clean. Debris can cause excess pump
Attach high Attach the high pressure hose to the pressure washer's water outlet.
pressure hose
1. See "Machine Component Identification" section of this manual for location
2. Your pressure washer hose is equipped with quick couplers. Simply pull the
Operation
ball valve CLOSED, as indicated in the diagram below.
Open this
ball valve
wear and reduce performance.
WARNING:
NEVER operate this pump with components (such as hose, connections,
and spray gun) rated for lower pressure and/or temperature limits than the
machine's maximum rated pressure and temperature, or component could
rupture and cause serious personal injury from escaping high pressure
fluids.
of the pressure washer's water outlet.
collar back and push the coupler onto the water outlet nipple. (Figure 8a).
The collar should slide over the ball bearings.
Coupler
Collar
High Pressure Output
Figure 8a
26
Close this ball valve