Fujitsu ETERNUS AF Series Configuration Manual page 56

4. Connection and Settings
Connecting to the Server UPS Unit
2
Connect the AC sensor unit to the power synchronized unit with the AC sensor port connection
cable.
When connecting the AC sensor port connection cable, check the connector orientation and then firmly
push it all the way in.
When disconnecting the AC sensor port connection cable, hold the tab of the connector while pulling it
out.
2-1
Attach the branch connector to the AC sensor output port of the AC sensor unit.
A branch connector is provided with the AC sensor unit.
Branch connector
2-2
Connect the AC sensor port connection cable to one of the ports on the branch connector that was
attached in
AC sensor port connection cable
2-3
Connect the connector at the other end of the AC sensor port connection cable to the AC SENSOR port
on the power synchronized unit.
Power synchronized unit
FUJITSU Storage ETERNUS AF, ETERNUS DX Configuration Guide (Power Synchronized Unit)
AC sensor output port
Step 2-1.
Branch connector
AC SENSOR port
AC sensor port connection cable
56
Copyright 2019 FUJITSU LIMITED P3AM-8012-14ENZ0