Fujitsu ETERNUS AF Series Configuration Manual page 14

Safety Precautions
WARNING
CAUTION
FUJITSU Storage ETERNUS AF, ETERNUS DX Configuration Guide (Power Synchronized Unit)
Do Not
• Do not place the power synchronized unit in locations subject to oil smoke, steam,
humidity and dust, or in places where the power synchronized unit may come into
contact with water. Doing so may lead to electric shock, fire, and/or damage the
power synchronized unit.
• Do not place any objects containing water such as vases and cups on or near the
power synchronized unit. Doing so may cause water to get into the power syn-
chronized unit and lead to electric shock, fire, and/or damage the power synchro-
nized unit.
• Do not place the power synchronized unit on an unstable floor. Doing so may
cause the power synchronized unit to fall, resulting in injury or damage to the
power synchronized unit.
• Do not connect power cords or any other cables to the power synchronized unit
during thunderstorms. Doing so may lead to electric shock and/or fire.
Unplug
• When the power synchronized unit is installed or moved, disconnect the power
plug from the socket. Remove all the connected cables. Watch your step during
the operation. Not doing so may damage the power cords and cause electric
shock or fire. Failure to do so may also cause the power synchronized unit to fall
and injure others.
Do Not
• Do not use the power synchronized unit in an area affected by corrosive gas or in
a salty environment. Doing so may cause device failure.
• Do not knock or place heavy objects on the power synchronized unit or optional
products. Doing so may cause injury or damage the power synchronized unit.
• Do not place the power synchronized unit in areas with strong magnetic fields,
such as in the vicinity of TVs or speakers. Doing so may damage the power syn-
chronized unit and cause the power synchronized unit to malfunction.
• Do not place power cords and other cables in locations where they may become
trip hazards. Doing so may cause injury or damage the power synchronized unit .
• Do not place the power synchronized unit on a slanted or unstable surface or in
areas that tend to shake. Doing so may cause it to tip over and injure others. Also,
do not place the power synchronized unit in high traffic areas such as in a hall-
way. Passersby can shake the unit, damage it or cause malfunction.
14
Copyright 2019 FUJITSU LIMITED P3AM-8012-14ENZ0