[Protect]; Preventing Accidental Erasure Of Pictures; Vqt0V10 - Panasonic Lumix DMC-LS2 Operating Instructions Manual

Menu Settings
∫ To print the date
After setting the number of prints, set/
cancel printing with the recording date by
pressing [DISPLAY].
DPOF SET THIS
1
DATE
COUNT
SELECT
• The date print icon [
• When you go to a photo printing store for
digital printing, be sure to order the
printing of the date additionally if required.
• Depending on the photo printing store or
the printer, the date may not be printed
even if you set to print the date. For further
information, ask at your photo printing
store or refer to the operating instructions
for the printer.
• DPOF is an abbreviation of [Digital Print
Order Format]. This feature allows you to
write print information to media and then
use the information on a DPOF-compliant
system.
• DPOF print setting is a convenient
function when printing pictures with a
printer that supports PictBridge (P77).
The date printing setting on the printer
may take priority over the date printing
setting on the camera. Check the date
printing setting on the printer also. (P77)
• It is necessary to delete all previous
DPOF print information made on other
equipment when setting DPOF print on
the camera.
• If the file is not based on the DCF
standard, the DPOF print setting cannot
be set. DCF is an abbreviation of [Design
rule for Camera File system], stipulated by
JEITA [Japan Electronics and Information
Technology Industries Association].
70

VQT0V10

100 _ 0001
1/14
1 DATE
DISPLAY
MENU
EXIT
] appears.
DATE

[PROTECT]

Preventing accidental erasure of
pictures
MENU
Press [ ] to display the [PLAY] mode
SET
menu and select the item to set. (P65)
You can set protection for pictures you do
not want to be deleted by mistake.
Press 3/4 to select [SINGLE],
[MULTI] or [CANCEL] and then
press [MENU/SET].
PLAY
PROTECT
RESIZE
TRIMMING
COPY
FORMAT
SELECT
∫ Single setting
1 Press 2/1 to select the picture
and then press 4 to set/cancel.
PROTECT THIS
SELECT
SET/CANCEL
SET The protect icon [
CANCEL The protect icon [
disappears.
2 Press [MENU/SET] twice to close
the menu.
∫ Multi setting/To cancel all settings
Perform the same operation as in
"[DPOF PRINT] Setting the picture to print
and the number of prints". (P68 to 70)
2 /
2
SINGLE
MULTI OFF
CANCEL
ON
MENU
MENU
SET
SET
100 _ 0001
1/3
MENU
EXIT
] appears.
]